Version History
Here you can find the changelog of SunPower Pro Connect since it was posted on our website on 2021-12-11.
The latest version is 6.170.0 and it was updated on soft112.com on 22 April, 2024.
See below the changes in each version:
version 6.170.0
posted on 2024-03-14
Improvements:
New feature notifies users when the PVS they are connected to is experiencing excessive flash memory wear. This alert serves as prompt for technicians to initiate a RMA for the affected PVS and to replace it with a new PVS to ensure optimal site performance.
The scanning feature has been enhanced to better scan third-party battery serial numbers.
Bug Fixes
'System Check report' bug fix.
'Error due to export limit’ bug fix.
version 6.169.0
posted on 2024-02-07
Improvements:
Ability to add third party storage information.
Improved Ethernet connection detection.
Clarified the RSE information text on System Configuration page.
Bug Fixes
Fixed an issue where the RETRY CONNECTION button would not appear after finishing the PVS FW Upgrade.
The GO BACK button on the PCS modal is again functional.
version 6.167.0
posted on 2024-01-12
Improvements:
(Enphase features will be rolled out gradually)
- Ability to commission Enphase storage systems in meter-only configuration.
- Enphase storage system serial number is captured in commissioning report.
- We now verify the serial number of the PVS every 5 minutes to ensure you are connected to the PVS you are commissioning.
version 6.166.0
posted on 2023-12-13
Improvements:
- Ethernet support for PVS6 commissioning: You can now connect to a PVS using an ethernet adapter and commission the system. This aims to provide an alternate mode of connection to the PVS where you do not have to wirelessly connect to the PVS6 access point over WiFi, ensuring higher reliability of connection.
- Ability to add Enphase storage information: You can now add Enphase storage serial number through ProConnect.This feature will be iteratively rolled in the coming weeks.
version 6.165.0
posted on 2023-12-01
Improvements:
Additional messaging during PVS5 commissioning to provide you with next steps when required.
Improved messaging on Manage Firmware screen when certain firmware packages fail to download.
Bug Fixes:
Sometimes if your device loses connection to the "PVS" after connecting to it on "SELECT A PVS" screen the modal "Please reconnect to the PVS" was not be shown - this has now been fixed.
Fixed an issue causing occasional app crashes.
version 6.164.2
posted on 2023-10-25
Improvements:
You can now enable panel level monitoring directly from ProConnect. This is available in the Panel Layout feature on the Submit Configuration page, and you can enable it once the panel layout is built.
We now inform you when the WiFi connectivity is poor or when you’re commissioning on cellular.
We improved the messaging for when you fail to submit configuration.
version 6.163.1
posted on 2023-09-27
Improvements:
- You can check your PCS access from the Settings page on ProConnect. This means that you can check your access to commission PCS systems at any time, even when not on-site.
- We’ve added voltage readings of the Hub+ on the commissioning report.
- We have a new scanning software to scan microinverter serial numbers.
Bug fixes:
-Previously, the Firmware Management sometimes prompted you to download FW packages even when they were up-to-date. This issue has now been fixed.
version 6.162.5
posted on 2023-08-25
Improvements:
- Changes to commissioning report
- Added messaging when there is a delay in claimed MIs being shown on the app
Bug fixes:
- Discovered but unclaimed MIs were not filtered out previously on module selection screen. This is now fixed.
- Connectivity improvements between ProConnect and PVS.
- Improved error handling on the Grid profile reports page.
version 6.161.2
posted on 2023-08-08
Improvements:
We've added a SunVault pre-commissioning tasklist with images of wiring to walk you help verify wiring before beginning the commissioning of SunVault. With this, we aim to help reduce workmanship issues and SunVault commissioning times.
We made changes to the bottom bar in ProConnect.
Updated commissioning report: The report will be available in SPFM under 'New Reports' on the site.
version 6.158.2
posted on 2023-07-14
Improvements:
Upon a successful commissioning, we now upload a commissioning report to SPFM on the customer site. You can access this report at any time to review system configuration during commissioning.
Improvements to commissioning report
Bug Fixes:
Clear messaging when you fail to submit configuration - previously, multiple issues were flagged through one error message. We’ve now broken them down to be displayed with distinct error messages.
UI bug fixes
version 6.156.4
posted on 2023-06-14
Improvements:
PVS5 commissioning improvements.
Previously, you could refresh the panel layout data before submitting configuration and the unsaved data would be lost. We’ve now added a warning to ensure that you’re aware before refreshing the panel layout.
Bug Fixes:
There were some UI issues on devices with large screen resolution. We’ve fixed them now.
version 6.155.4
posted on 2023-05-22
Improvements:
We inform you when the information in the live data page is not up to date.
Bug Fixes:
UI bug fixes in MI discovery screen and Search for Site screen.
Generating a commissioning report on the first trial was previously failing sometimes. This has now been fixed.
version 6.154.8
posted on 2023-05-02
Improvements:
Ability to scan U-series panel serial numbers
We support 200A CT rating on the Site Settings page.
On the Site Settings page, we updated the text for the pop-up which appears when PVS does not detect a voltage
Improvements to commissioning report
Bug Fixes:
Discovered but unclaimed MIs were not being filtered out on the "Devices on this PVS" screen. This logic has been fixed.
PCS flow bug fixes
Grid profile reports in knowledge base could not be downloaded. This is now fixed.
version 6.152.2
posted on 2023-03-23
Improvements:
We moved PCS screen to show after pre-discovery, to ensure that you’ll be shown the PCS screen only for multi-inverter systems.
We’ve added an additional layer of checks for PCS
Improved module type selection
We’ve improved the formatting of the commissioning report and we also provide grid profile selection info for every MI.
You can download the grid profile reports straight from ProConnect!
Bug Fixes:
UI-related bug fixes
version 6.130.0
posted on 2022-05-04
You're now able to associate the PVS6 to the correct site at the end of commissioning if you chose an incorrect site at the beginning.
version 6.129.1
posted on 2022-04-06
Improvements
Added ability to update PVS5 firmware
For commissioned systems, the App will now display the last configured values for the meter subtype so that you don’t have to select it again.
Sunvault installers can no longer commission SunVault without MIs. Its now required to commission MIs first before you can commission SunVault. This will help prevent unexpected behavior during offgrid scenarios.
Bug Fixes
We’ve fixed the App screen crash that happens during SUBMIT CONFIGURATION .
version 6.127.0
posted on 2022-02-14
Bug Fixes
Fixed issue with the PVS replace flow where the MIs could not be carried over from the old PVS to the new one.
PVS firmware upgrade shows an incorrect status as ‘successful’ when Wifi gets disconnected in the first step. The bug is fixed now.
version 6.122.2
posted on 2021-11-29
We’ve now added SunPower Pro Connect tutorial videos under the knowledge base section in the App.
Bug Fixes
You had to sometimes reboot the PVS in order to connect to PVS because the Wifi access point could not be enabled with Bluetooth. This bug is now fixed.
RETRY button on the DEVICES screen was not working after a failed device discovery. The RETRY button now allows you to try device discovery.